TomoScope® L FQ
Ultra-fast industrial 3D CT for extra-large workpieces
Ultra-fast 3D computed tomography (CT) equipment suitable for in-line environments
Technical specifications
Accuracy (MPE)4.5 µmISO 10360 standard
Resolution100 nmMinimum voxel size (Voxel Size)
Maximum measuring rangeD=470 / L=678 mm
Key benefits
The TomoScope® FQ product line performs calculations and evaluations of point clouds up to 50 times faster than existing equipment. For measurements such as valve blocks, housing, and components, the shape properties are produced almost every 30 seconds, and the measuring point cloud of the master component is compared to the matching and real-world measurements, and the bug-like fault testing is performed. WinWerth® Scout measuring software shows a clear state of the measurement process in progress or completed, and can get all measurement results with one mouse click.
- All TomoScope® meters are offered as "FQ" models, with high density materials and large meters that require no maintenance to measure quickly. The sealing high-performance X-ray tube integrates a shutter to prevent the tube's cumbersome switching and slipping process, and to implement high performance and fast image acquisition when operating a long-life gain on-the-fly. High-end detector front door or upper loading gate through a robotic input from an offline workstation to generate remote programming QR codes or RFID chips, to clearly identify the measurement and discharge.
Compatible sensors and accessories
Sensors
3D CT
The X-ray source, which supports a voltage of up to 300 kV, achieves a monoblock design that delivers short measurement time and low maintenance costs at the same time, combining a high-resolution detector up to 28 megapixels to capture the micro-format clearly and ensure low measurement inaccuracy.
Accessories
Rotary axis
The rotary axis allows for the complete measurement of both rotational symmetrical and rectangular measurements at different points, providing optimal measurement access for different sensors. The loss of time and accuracy due to re-reporting disappears. Combining high position precision and oscillation correction functions, shafts, tools, gears, 3D measurements, etc. can be measured in a stable manner.
Accessories
Workpiece changing system
When a measuring system is directly integrated into the equipment, it can automatically supply the same or different components within the measuring area without additional setup time or separate radiation shutdown measures. The measuring equipment can be securely sealed throughout the entire measuring series, and can also perform measurements during "free" shift work without the intervention of the worker.
Accessories
CNC filter changer
Filtering the low-frequency radiation content can also reduce the antifact and measure the measurements that are large or difficult to pass. Beam painting filters of various materials and thicknesses ensure the optimal combination of antifact reduction and low noise. The selected filter is automatically replaced when the measurement program starts.
Accessories
WRT rotary/tilt head
Using the variable Werth rotary/ticket head, you can use chromatic focus point sensors to be positioned vertically on the surface of the measuring material, which greatly expands the range of application of the sensor, for example, even in a small wave profile with a diameter of 0.1 mm, you can measure line profile shape, channel depth, center of field offset, and embounding angle.
Accessories
PH10M rotary/tilt head
PH10M rotary/ticket heads can be used to position contact sensors parallel to the axis. They can replace contact measuring heads for cost-effective single-point measurement or scanning modes using various probes. Multipurpose rotary/ticket heads greatly expand the scope of coordinate measurement, especially in large and complex formats.
